Last Updated: November 1, 2026

The cheapest house to build in Australia is a small, single-storey house with a simple rectangular footprint, a single gable or skillion roof and the kitchen, bathroom and laundry grouped together, built on a level block that already has power, water and road access. Floor area drives the total more than anything else, so the cheapest house is usually the smallest one that meets your needs, with the option to extend later.

This guide is about which house to build: the house types, sizes and design features that cost least, with real designs from our range at each size. For a comparison of building methods (kit, project home, modular, owner building) see the cheapest way to build a house in Australia.

Small single-storey two bedroom steel frame kit home concept

What makes a house cheap to build?

Every square metre has to be framed, roofed, clad, lined, insulated and heated, so the size of the house sets the baseline. For scale, the average new house in Australia has a floor area of about 230 m² (229.8 m² in 2018-19, ABS). A 100 m² three bedroom house or a 60 m² two bedroom house needs far less of everything.

After size, the shape and the number of trades matter most. The table shows the features that keep a house cheap and why.

Feature Cheaper choice Why it costs less
Floor area Only the rooms you need now; extend later Less of every material and every trade
Footprint A simple rectangle Fewer corners, junctions and flashings in the frame, roof and cladding
Roof One gable or one skillion No hips or valleys; fewer roof sheets cut and less labour
Storeys Single storey on a level site No stairs, less scaffolding and simpler engineering
Wet areas Kitchen, bathroom and laundry side by side Shorter plumbing and drainage runs
Windows and doors Standard sizes; large glazing to the north only Stock sizes cost less and good orientation lowers running costs
Bathrooms One bathroom plus a separate toilet Wet areas are the most expensive rooms per square metre
Block Level, serviced, good access for trucks Less earthworks, retaining and service connection cost

One caution: a smaller house is cheaper in total but often costs more per square metre, because the kitchen, bathroom and service connections cost much the same whatever the size. Compare total budgets, not $/m² figures.

The cheapest house types by size

These are designs from the current Kit Home Floor Plans range, sorted by bedrooms and floor area. They are all simple shapes; the smallest in each group is usually the cheapest to build. BRIbuild kits are structure only (steel frames, roof trusses, subfloor and engineering), so the total build cost depends on your site, finishes and labour.

Size of house Design Floor area Storeys Published kit price
Studio / 1 bedroom The Jamieson A-frame retreat 25 m² 1 $35,000 + GST
Studio The Dargo studio 30 m² 1 On enquiry
1 bedroom The Tarwin 36 m² 1 On enquiry
1 bedroom The Koonwarra gable / The Boolarra skillion 40 m² 1 On enquiry
1 bedroom with loft The Marysville A-frame 60 m² 2 $65,000 + GST
2 bedroom The Stratford / The Toora 48 m² 1 On enquiry
2 bedroom The Meeniyan 60 m² 1 On enquiry
2 bedroom The Harcourt A-frame 80 m² 1 $79,500 + GST
3 bedroom The Rosie 95 m² 1 On enquiry
3 bedroom The Mirboo 130 m² 1 On enquiry
4 bedroom The Heyfield barn 165 m² 2 On enquiry
3 bedroom, larger The Dinner Plain A-frame 180 m² 2 $145,000 + GST

Browse by size: 2 bedroom kit homes, 3 bedroom kit homes, 4 bedroom kit homes, single storey designs and granny flats.

What is the cheapest 3 bedroom house to build?

The cheapest three bedroom house is a compact single-storey plan of around 95 to 130 m² with one bathroom, a separate toilet and an open kitchen, living and dining room under one gable roof. The Rosie (95 m²) and the Mirboo (130 m²) are the two smallest three bedroom designs in our range. A second bathroom, an attached garage or an L-shaped footprint each add cost; a carport or garage can be added later as a separate structure.

What is the cheapest 4 bedroom house to build?

For four bedrooms, a two-storey barn-style plan can be cheaper than a sprawling single-storey plan, because the same roof and slab or subfloor cover more rooms. The Heyfield fits four bedrooms into 165 m² over two levels. On a level block where stairs are not wanted, a straight single-storey rectangle with the bedrooms along one side is the next cheapest layout.

Is a granny flat or second home the cheapest option?

If you already own land, a small second home is often the cheapest way to add a dwelling, because there is no land to buy and the floor area is small. Size limits apply: in Victoria a small second dwelling can be up to 80 m² from 15 October 2026 under amendment VC306 (planning.vic.gov.au), though the building regulations definition still lists 60 m², so confirm with your building surveyor. In New South Wales a secondary dwelling is generally limited to 60 m² (NSW Planning). See our Victorian small second dwelling guide and the granny flat designs.

What does a kit cover and what costs extra?

Included in a BRIbuild kit Priced separately (by you or your builder)
Steel wall frames, cut to length and labelled Site works, soil test, survey and service connections
Roof trusses Slab or footings and their installation
Steel subfloor system (where used) Roofing, cladding, windows and doors
Engineering for your site Plumbing, electrical, insulation, linings and fit-out
Drafting and approvals support Council, permit and inspection fees

We assist you with drafting, council planning and DA, and building permits. Delivery is quoted with your kit, anywhere in Australia, through our network in seven locations: Melbourne, Sydney, Adelaide, Gold Coast, Brisbane, Bundaberg and Perth. For how to keep the rest of a steel frame build on budget, stage by stage, see building a steel frame kit home cheaply.

Frequently asked questions

What is the cheapest house to build in Australia?

A small, single-storey house with a simple rectangular plan, one roof plane or a single gable, grouped wet areas and standard window sizes, on a level, serviced block. The smallest plan that meets your needs is usually the cheapest overall.

Is a smaller house always cheaper?

In total, yes. Per square metre, often not, because the kitchen, bathroom and service connections cost much the same in a small house as in a large one. Compare the total budget for each option.

Is a single-storey or double-storey house cheaper?

For small homes, single storey is usually cheaper: no stairs, less scaffolding and simpler engineering. For four or more bedrooms a compact two-storey plan can cost less than a large single-storey footprint, because one roof and floor cover more rooms.

How much does the cheapest kit home cost?

The lowest published kit price in our range is The Jamieson A-frame retreat at $35,000 + GST for the structure (25 m², one bedroom). Most other designs are priced on enquiry. The total build cost also includes site works, roofing, cladding, windows, services, fit-out and labour.

Can I build a cheap house as an owner builder?

Yes, owner building removes the builder’s margin, but you take on managing trades, insurance and inspections, and each state has its own permit rules. Licensed trades must still do electrical and plumbing work. See is it cheaper to be an owner builder and the owner builder designs.

Can I extend a small house later?

Yes, if you plan for it. Choose a plan where a future bedroom wing or deck can join a straight wall, and check setbacks and site coverage on your block before you build. We can adjust any of our designs to suit.

Get a price on the design you like

Pick a design from the floor plans and ask us for a kit quote, or call 1300 866 131. We can adjust any plan to suit your block and budget.

Ready to Explore Kit Home Floor Plans?

Browse our collection of steel frame kit home designs or get in touch for a custom quote.

Browse Floor Plans 1300 866 131