Steel Frame Kit Homes in Crafers, SA

You can build a steel frame kit home in Crafers with development approval (planning consent and building consent) lodged through PlanSA and assessed by Adelaide Hills Council or a private certifier. Crafers is an Adelaide Hills township beside the South Eastern Freeway, just below Mount Lofty, in the Adelaide Hills Council area. Kit prices are published per design and cover the structure only, from $35,000 + GST, with freight quoted.

Building in Crafers: What to Check First

Check What it means for a kit home
Zone and overlays Look up the lot on the SA Property and Planning Atlas (SAPPA); the zone and overlays in the Planning and Design Code decide how the dwelling is assessed
Bushfire Much of the Hills is in the Hazards (Bushfire – High Risk) Overlay; Adelaide Hills Council refers dwellings in that overlay to the Country Fire Service, which has six weeks to respond and can set conditions. The house is built to its BAL under AS 3959
Water catchment Crafers lies in the Mount Lofty Ranges water supply catchment, where siting and on-site wastewater policies can apply
Slope Hills lots are often steep; a steel subfloor on adjustable footings avoids large cut and fill on a sloping site
Climate Cool, wet Hills winters: the energy assessment sets the insulation and glazing, which your trades supply
Wind South Australia is non-cyclonic; your engineer sets the wind class under AS 4055 from the terrain, shielding and topography of the lot
Soil A site classification under AS 2870 sets the footing or slab design

Approvals for a Kit Home in Crafers

Approval Who issues it When
Planning consent Adelaide Hills Council (or the assessment panel), lodged through the PlanSA portal Before building; the zone and overlays set the assessment pathway
Building consent Adelaide Hills Council or a private building certifier Before work starts; together with planning consent this is development approval
Owner building No separate owner builder permit in SA Plumbing, gas and electrical work still need licensed trades, and an owner builder cannot take out building indemnity insurance (SAFA)

South Australia stays on NCC 2022 (Amendment 2) until 30 April 2027 and moves to NCC 2025 from 1 May 2027 (ABCB adoption table).

Granny Flats in Crafers

South Australia’s Planning and Design Code calls a granny flat ancillary accommodation. A granny flat of up to 70 m² with no more than 2 bedrooms behind an existing house can follow the deemed-to-satisfy pathway where the zone allows it, and it can now be rented to anyone (PlanSA). See our granny flat size limits by state and granny flat designs.

Kit Home Prices

Design Size Kit price
Jamieson A-frame retreat 25 m² $35,000 + GST
Marysville A-frame with loft 60 m² $65,000 + GST
Harcourt A-frame 80 m² $79,500 + GST
Dinner Plain grand A-frame 180 m² $145,000 + GST

Other designs are quoted for your site. See kit homes under $100k and the kit home cost per square metre guide.

Not in the kit, and priced locally:

  • Site preparation, earthworks and footings or slab
  • Roofing, cladding, windows and doors
  • Insulation, linings, flooring, kitchen and bathrooms
  • Plumbing and electrical
  • Planning and building permit fees
  • Labour, unless you owner build

What the Kit Includes

A BRIbuild kit is the structure only: TRUECORE steel subfloor where used, wall frames, roof trusses and the engineering for your site. Roofing, cladding, windows, doors, insulation, flooring, linings, plumbing, electrical and labour are supplied by you and your local trades, and freight is quoted to your site through our national supply network.

A Common Crafers Brief

Hills enquiries are often for a 2 or 3 bedroom home on a sloping, bushfire-rated block, or a studio or granny flat behind an existing house. On a bushfire-mapped lot, the BAL sets the cladding, glazing and decking your trades supply, so get the BAL assessment before finalising the design.

Steps From Design to Lock-Up

  1. Choose a design from the floor plan library and send us your address.
  2. Site checks: SAPPA overlays, soil classification, survey and BAL where a bushfire overlay applies.
  3. Engineering and drawings for planning consent and building consent through PlanSA.
  4. Approvals, then footings or slab by your local trades.
  5. Kit delivery and frame erection.
  6. Roofing, cladding, windows and fit-out by your trades.

Related Areas

FAQs – Kit Homes Crafers

How much does a kit home cost in Crafers?

Published kit prices run from $35,000 + GST (Jamieson, 25 m2) to $145,000 + GST (Dinner Plain, 180 m2), structure only. Footings, roofing, cladding, windows, fit-out and labour are extra, and freight is quoted.

Will my Crafers kit home be referred to the CFS?

If the lot is in the Hazards (Bushfire – High Risk) Overlay, yes. Adelaide Hills Council refers dwellings in that overlay to the CFS, which has six weeks to assess it and can set conditions.

Can a kit home be built on a steep block in Crafers?

Yes. A steel subfloor on adjustable footings is engineered for the slope, so the floor stays level without large cut and fill.

Do I need an owner builder permit in Crafers?

No. South Australia has no separate owner builder permit, but licensed trades must do the plumbing, gas and electrical work, and owner builders cannot take out building indemnity insurance.

Which NCC applies to a new home in Crafers?

South Australia applies NCC 2022 (Amendment 2) until 30 April 2027 and NCC 2025 from 1 May 2027, according to the ABCB adoption table.

Get a Quote for Your Crafers Project

We assist you with drafting, council planning and DA, and building permits. Send us your address and the design you like.

Thanks! We'll be in touch soon.

Or call 1300 866 131 to discuss your Crafers kit home project.

Ready to Find Your Floor Plan?

Browse our collection of 35+ certified kit home designs.

Browse Floor Plans 📞 1300 866 131