Last Updated: November 1, 2026

BRIbuild steel frame kit home prices start from $35,000 + GST for a 25 m² one-bedroom design and reach $145,000 + GST for a 180 m² design, and every price is for the structure only: steel subfloor, wall frames, roof trusses and engineering. Most of our 77 designs are priced for your site, because the wind rating, bushfire attack level (BAL) and soil all change the engineering. This guide shows the published prices, the size of each design by bedroom count, what the kit price covers, and how labour and delivery are priced.

Published Kit Home Prices

These are the BRIbuild kit prices currently published on Kit Home Floor Plans. Prices are for the structure only and exclude GST and delivery.

Design Bedrooms Floor area Published kit price
The Jamieson A-frame 1 25 m² $35,000 + GST
The Marysville A-frame with loft 1 60 m² $65,000 + GST
The Harcourt A-frame with side extension 2 80 m² $79,500 + GST
The Dinner Plain A-frame 3-4 180 m² $145,000 + GST

Every other design is priced on request for your site. We do not publish a price per square metre, because the same floor area can need very different steel and engineering on a cyclonic coast, a BAL-FZ bush block or a reactive clay site.

Kit Home Sizes by Bedroom Count

Use the size range to see where your plans sit, then compare designs of that size. Floor areas are as listed in our catalogue of 77 designs.

Bedrooms Designs Floor area range Examples
Studio (0) 6 15-68 m² The Dargo studio, the Hepburn Scandi garden studio
1 bedroom 14 25-70 m² The Jamieson ($35,000 + GST), the Tarwin, The Marysville ($65,000 + GST)
2 bedrooms 18 48-120 m² The Stratford, the Gundagai cottage, The Harcourt ($79,500 + GST)
3 bedrooms 24 95-255 m² The Mansfield farmhouse, the Foster, The Dinner Plain ($145,000 + GST)
4 bedrooms 11 165-250 m² The Dorrigo barn, the Homestead
6 bedrooms 2 315-320 m² The Trentham barn, the Coastal

Browse by bedroom count, style and size in the kit home floor plans, or see kit homes under $150k.

What the Kit Price Covers (Materials)

BRIbuild kits are structure only. The kit price covers the BlueScope TRUECORE steel subfloor (where the design uses one), wall frames and roof trusses, with the connections and fixings for the frame, and the structural engineering for your site. Roofing, cladding, windows, doors, insulation, flooring, linings and the internal fit-out are not in the kit: you buy them from your own suppliers or through your builder.

In the BRIbuild kit Not in the kit (priced separately)
Steel subfloor (where used) Slab or footings, site works
Steel wall frames Roofing and cladding
Steel roof trusses Windows and external doors
Engineering for your site’s wind rating, BAL and soil Insulation, flooring, linings, kitchen, bathrooms, plumbing and electrical

Because the kit is the structure only, compare it with other quotes line by line: some kit suppliers include roofing, cladding or windows, so a higher kit price is not always a higher total. Our kit home cost breakdown and hidden costs checklist list every line to price.

What Changes the Kit Price

Factor Why it changes the price Standard
Floor area and footprint More wall length and roof area means more steel; simple rectangles use less steel per m² than L-shapes and pavilions –
Roof form and pitch Steep A-frame, barn and loft roofs need larger trusses and more bracing than a low skillion or gable –
Storeys and lofts Upper floors add floor framing and heavier wall frames below –
Wind classification Higher wind classes, and cyclonic C classes, need heavier framing and tie-downs AS 4055, AS/NZS 1170.2
Bushfire attack level Higher BALs change materials and details around the frame AS 3959
Soil and slope Reactive or sloping sites can suit a raised steel subfloor instead of a slab AS 2870
Changes to a design Moved walls, bigger openings or added rooms are re-engineered and re-priced –

Labour: Who Builds It and How It Is Priced

The kit price does not include labour. You either engage a licensed builder, who prices the build from your plans and kit, or you owner build and engage the trades yourself. There is no reliable national figure for labour on a kit home, so get written quotes for your site. For scale, ABS data put the average value of a new house approved in Australia in the 2025-26 financial year at $517,430, excluding land (ABS building approvals, 30 July 2026 release). That covers every kind of new house, not kit homes.

Who builds What to know
Licensed builder Quotes the full build; home warranty insurance applies above each state’s threshold. See how builders price a kit home.
Owner builder You manage the trades. Owner-builder rules start above $20,000 in Victoria, above $10,000 in NSW and at $11,000 or more in Queensland. Licensed trades still do plumbing, drainage and electrical work. See is it cheaper to be an owner builder.

Delivery Costs

Delivery is quoted for your address with your kit. It depends on the distance from the nearest of our seven network locations (Melbourne, Sydney, Adelaide, Gold Coast, Brisbane, Bundaberg and Perth), the size of the kit and the truck access to your site. Remote or steep sites may need extra planning for access and unloading.

How to Get an Accurate Kit Price

  1. Choose a design from the floor plans, or send your own plans.
  2. Give us your site address, so we can check the wind classification, BAL and delivery.
  3. Tell us about the soil test and slope if you have them; otherwise we note the assumptions.
  4. We price the structure kit and quote delivery, and we assist you with drafting, council planning and DA, and building permits.
  5. Collect quotes for everything else so you can compare total costs, not just kit prices. See the kit home costs guide.
4 bedroom family steel frame kit home design of 220 m2
A 4 bedroom family design of 220 m². Larger designs are priced for your site.

Frequently Asked Questions

How much does a steel frame kit home cost in Australia?

Published BRIbuild kit prices run from $35,000 + GST for a 25 m² design to $145,000 + GST for a 180 m² design, for the structure only (steel subfloor, wall frames, roof trusses and engineering). Other designs are priced for your site. The finished home costs more, because footings, roofing, cladding, windows, services, fit-out, approvals, labour and delivery are priced separately.

Is there a price per square metre for kit homes?

We do not publish one. Wind rating, bushfire level, soil, roof form and storeys change the steel and engineering, so two designs of the same size can be priced quite differently. Compare published prices for designs close to your size, then get a site price.

Does the kit price include windows, doors, roofing or cladding?

No. BRIbuild kits are structure only. Windows, doors, roofing, cladding, insulation, flooring and the fit-out are supplied and installed by your trades.

Is delivery included in the kit price?

No. Delivery is quoted for your address with your kit, from the nearest of our seven network locations.

Do bigger homes cost more per square metre?

Not necessarily. Steep roofs, lofts, second storeys and complex footprints add more to the kit price than floor area alone, while a simple rectangular plan uses steel efficiently.

How do I get a price for a design that has no published price?

Send us the design name, or your own plans, and your site address. We price the structure kit for your site’s wind rating, BAL and soil, and quote delivery.

📄

Free 2026 Kit Home Pricing Guide

Steel frame kit pricing, inclusions & what to expect

Ready to Explore Kit Home Floor Plans?

Browse our collection of steel frame kit home designs or get in touch for a custom quote.

Browse Floor Plans 1300 866 131