Kit Homes Perth
A steel frame kit home for Perth starts from $35,000 + GST for the kit, the published price of our 25 m² Jamieson. Every kit is the structure only: steel subfloor where the design uses one, wall frames, roof trusses and engineering for your site. Perth is one of our seven supply locations, and this page covers Perth soils, granny flats, the Hills, approvals and the designs that suit them.
Building a Kit Home in Perth
Most Perth kit home enquiries are for one of three things: a granny flat behind an existing house, a family home in a growth corridor such as Baldivis, Ellenbrook or Butler, or a home on acreage in the Hills or the shires to the south and east, such as Serpentine-Jarrahdale and Murray.
Three local factors shape the engineering. On the coastal plain, sandy soils are common and a soil report to AS 2870 sets the slab. In the Perth Hills (Kalamunda, Mundaring) the ground is often rock or gravel on a slope, where a raised steel subfloor can avoid heavy excavation. And much of the urban fringe is on the WA Map of Bush Fire Prone Areas, where the house is built to its BAL under AS 3959.
Perth itself is in non-cyclonic wind Region A; each kit is engineered to the site wind class under AS 4055. If your block is in the cyclonic north, see the Western Australia kit homes guide.
Kit Home Prices in Perth
Four designs carry a published kit price. Other designs are quoted for your site.
| Design | Bedrooms | Floor area | Published kit price |
|---|---|---|---|
| The Jamieson A-frame retreat | 1 | 25 m² | $35,000 + GST |
| The Marysville A-frame with loft | 1 + loft | 60 m² | $65,000 + GST |
| The Harcourt A-frame | 2 | 80 m² | $79,500 + GST |
| The Dinner Plain A-frame | 3-4 | 180 m² | $145,000 + GST |
Our kit homes under $100k guide lists the lower-priced designs. Footings, roofing, cladding, windows and doors, insulation, services, fit-out, the energy rating, approvals and delivery are quoted separately; the kit home cost breakdown lists every line to price.
Popular Kit Home Designs for Perth
| Your block or plan | Design to look at | Also consider |
|---|---|---|
| Granny flat behind a house (up to 70 m²) | The Stratford (2 bed, 48 m²) | The Meeniyan (2 bed, 60 m², country) |
| Growth-corridor family lot | Rosie (3 bed, 95 m²) | Hampton (3 bed, 140 m²) |
| Narrow infill lot | The Toora (2 bed, 48 m², verandah, narrow blocks) | The Stratford (2 bed, 48 m²) |
| Perth Hills slope | Kinglake (2 bed, 66 m², sloping block cabin) | Tamborine (3 bed, 144 m², sloping block) |
| Acreage with a shed or workshop | Beechworth shed home (3 bed, 140 m², double garage) | Korumburra (3 bed, 150 m², barn style) |
Every plan can be changed to suit your block, or you can bring your own design. More designs:
Granny Flats in Perth
A granny flat (ancillary dwelling) of up to 70 m² that meets the R-Codes deemed-to-comply provisions doesn’t need development approval on a residential lot of any size, since the 350 m² minimum lot size was removed in 2024 (WA Government, January 2024). Setbacks still apply and it always needs a building permit from your local government. Designs that fit include the Stratford and Toora (48 m²), the Meeniyan (60 m²) and the Toongabbie (65 m²). Draft change, not yet law: the draft R-Codes released for comment on 24 October 2026 propose lifting the granny flat limit from 70 m² to 90 m² and removing minimum car parking for granny flats. Submissions close on 26 February 2027 and any change is expected later in 2027 (WA Government). Until then, 70 m² applies.
What Comes in the Kit
| Included in the kit | Supplied by your trades |
|---|---|
| Steel wall frames (BlueScope TRUECORE steel) | Slab or footings and site works |
| Steel roof trusses | Roofing, cladding, windows and doors |
| Steel subfloor where the design uses one | Insulation, linings and flooring |
| Site-specific engineering for wind, soil and BAL | Plumbing, electrical, kitchen, bathroom, energy rating |
Not sure why windows and roofing aren’t in the kit? Ask us why: buying them locally lets your trades match them to your BAL, wind class and energy rating.
Council Approval in Perth
Every new home in WA needs a building permit from the local government (shire or city) under the Building Act 2011. You can lodge a certified application, with a certificate of design compliance from a registered private building surveyor, or an uncertified one that the local government checks itself. Depending on the zone, the R-Codes and the local planning scheme, you may also need development approval first. We assist you with drafting, council planning and DA, and building permits.
WA applies the NCC 2022 energy efficiency provisions (7-star) from 1 May 2025 and has not adopted the livable housing provisions (ABCB adoption dates). WA adopted NCC 2025 on 1 May 2026, and NCC 2022 is still accepted for approvals until 1 May 2027.
Owner builders need approval from the Department of Local Government, Industry Regulation and Safety when the building work is worth more than $20,000. You can only get one owner-builder permit every six years without a waiver, and selling within seven years is an offence unless home indemnity insurance covers the next owner (WA owner-builder approval). See our owner builder guide.
Delivery in Perth
BRIbuild supplies through a network in seven locations: Melbourne, Sydney, Adelaide, Gold Coast, Brisbane, Bundaberg and Perth. Delivery is quoted for your address with the kit, whether that is a Perth suburb or a station in the Pilbara.
Kit Homes Perth: FAQs
How much does a kit home cost in Perth?
Kit prices start from $35,000 + GST for the 25 m² Jamieson, with published prices of $65,000, $79,500 and $145,000 + GST for the larger A-frames. Other designs are quoted for your site. The finished cost depends on site works and trades, so price those locally.
Do I need council approval for a granny flat in Perth?
Not development approval, if it is up to 70 m² and meets the R-Codes deemed-to-comply provisions on a residential lot. It still needs a building permit from your local government, which also confirms setbacks and any local scheme rules.
Are kit homes supplied from Perth?
Perth is one of the seven locations in the BRIbuild supply network (with Melbourne, Sydney, Adelaide, Gold Coast, Brisbane and Bundaberg). Delivery to your site is quoted with the kit.
Do Perth’s sandy soils suit a steel frame kit home?
Yes. The frame sits on whatever footing the soil report calls for. Sandy coastal sites usually take a standard slab; Hills sites with rock or slope can use a raised steel subfloor.
Does the kit include windows, doors and roofing?
No. The kit is the structure only: steel subfloor where used, wall frames, roof trusses and engineering. Your trades supply roofing, cladding, windows, doors, insulation and fit-out.
Related Areas
- Kit Homes Western Australia (state guide)
Get a Quote for Your Perth Project
Or call 1300 866 131 to discuss your Perth kit home project.