Steel Frame Kit Homes in Old Bar, NSW
You can build a steel frame kit home in Old Bar with a development consent or complying development certificate (CDC), a construction certificate, and an owner builder permit from NSW Fair Trading if you build it yourself. Old Bar is a coastal village on the Mid North Coast about 15 km east of Taree, in the MidCoast Council area. Kit prices are published per design and cover the structure only, from $35,000 + GST, with freight quoted.
Building in Old Bar: What to Check First
| Check | What it means for a kit home |
|---|---|
| Planning certificate (section 10.7) | Shows the zone and any flood, bushfire or coastal hazard affecting the lot under the MidCoast Council planning controls |
| Coastal hazards | Parts of the Old Bar foreshore have a long history of beach erosion; lots near the beach can be mapped as a coastal hazard area, and coastal land falls under the coastal management chapter of the Resilience and Hazards SEPP |
| Corrosion | Steel frames on the coast need a coating and fixings to suit the marine exposure; your engineer specifies them from the distance to breaking surf and salt water |
| Flooding | Low-lying land toward the Manning River and Farquhar Inlet can be in a flood planning area with a minimum floor level; a raised steel subfloor on adjustable footings can reach it without fill |
| Bushfire | On mapped bush fire prone land, the design must meet Planning for Bush Fire Protection and the site’s BAL under AS 3959 |
| Wind | Your engineer sets the wind class under AS 4055 from the wind region, terrain, shielding and topography of the lot |
| Energy | A BASIX certificate is needed for a new dwelling in NSW |
Approvals for a Kit Home in Old Bar
| Approval | Who issues it | When |
|---|---|---|
| Development consent (DA) or CDC | MidCoast Council (DA) or a registered certifier (CDC) | Before building; a CDC only where the lot and design meet the code |
| Construction certificate | Council or a registered certifier | Before work starts on a DA approval |
| Owner builder permit | NSW Fair Trading | Owner building work over $10,000; an approved course is also needed over $20,000 |
New South Wales stays on NCC 2022 until 1 May 2027, then moves to NCC 2025 (ABCB adoption table).
Granny Flats in Old Bar
In a residential zone, a secondary dwelling is limited to 60 m² under the Housing SEPP, unless the council’s local environmental plan allows more (NSW Planning). On rural land the local environmental plan can set a different floor area and distance from the main house, so check the zone on your 10.7 certificate. See our granny flat size limits by state and granny flat designs.
Kit Home Prices
| Design | Size | Kit price |
|---|---|---|
| Jamieson A-frame retreat | 25 m² | $35,000 + GST |
| Marysville A-frame with loft | 60 m² | $65,000 + GST |
| Harcourt A-frame | 80 m² | $79,500 + GST |
| Dinner Plain grand A-frame | 180 m² | $145,000 + GST |
Other designs are quoted for your site. See kit homes under $100k and the kit home cost per square metre guide.
Not in the kit, and priced locally:
- Site preparation, earthworks and footings or slab
- Roofing, cladding, windows and doors
- Insulation, linings, flooring, kitchen and bathrooms
- Plumbing and electrical
- Planning and building permit fees
- Labour, unless you owner build
What the Kit Includes
A BRIbuild kit is the structure only: TRUECORE steel subfloor where used, wall frames, roof trusses and the engineering for your site. Roofing, cladding, windows, doors, insulation, flooring, linings, plumbing, electrical and labour are supplied by you and your local trades, and freight is quoted to your site through our national supply network.
A Common Old Bar Brief
Many coastal enquiries are for a 2 or 3 bedroom home or a holiday house with a deck facing the breeze, or a compact granny flat behind an existing house. Decks are usually priced separately from the house floor area, so ask for them as a separate line in your quote.
Steps From Design to Lock-Up
- Choose a design from the floor plan library and send us your address.
- Site checks: 10.7 certificate, soil test, survey and BAL.
- Engineering and drawings for the DA or CDC, with BASIX.
- Approvals, then footings or slab by your local trades.
- Kit delivery and frame erection.
- Roofing, cladding, windows and fit-out by your trades.
Related Areas
FAQs – Kit Homes Old Bar
How much does a kit home cost in Old Bar?
Published kit prices run from $35,000 + GST (Jamieson, 25 m2) to $145,000 + GST (Dinner Plain, 180 m2), structure only. Footings, roofing, cladding, windows, fit-out and labour are extra, and freight is quoted.
Can I build a kit home close to the beach at Old Bar?
Often yes, but check the 10.7 certificate first. Lots near the beach can be in a mapped coastal hazard area, which affects what council will approve, and the frame coating and fixings must suit the marine exposure.
How big can a granny flat be in Old Bar?
In a residential zone, 60 m2 under the Housing SEPP, unless the council’s local environmental plan allows more. On rural land the local environmental plan can set a different limit.
Do I need an owner builder permit in Old Bar?
Yes, from NSW Fair Trading if the owner builder work is worth more than $10,000, and you also need to complete an approved course if it is worth more than $20,000.
Which NCC applies to a new home in Old Bar?
NSW applies NCC 2022 until 1 May 2027, then NCC 2025, according to the ABCB adoption table.
Get a Quote for Your Old Bar Project
We assist you with drafting, council planning and DA, and building permits. Send us your address and the design you like.
Or call 1300 866 131 to discuss your Old Bar kit home project.